FACTORY WHOLESALE WET FLOOR ADHESIVE MORTAR 1084 (WHITE)

FACTORY WHOLESALE WET FLOOR ADHESIVE MORTAR 1084 (WHITE)

CAS: 65997-16-2

Product Code: 1084
Quality Certificates: The product conforrns to the EN 12004-1 standard C2T class, CE

Origin: Turkey
Item Status: Original
Brand: INNTURK / Unbranded
Package Shape: Kraft Bag 25 kg
Sales Type: Wholesale
Documents: Test, TPS, Health, Quality and export certificates
Usage: Construction building elements, Construction, adhesive mortar, plaster mortar, masonry mortar, flooring
Brand customization: Private branding is workable on orders of at least 10 containers.

Description: A white cement based, single component, flexible adhesive mortar with high performance and stability which contains polymer additives.
Application Areas:: Indoor and outdoor, horizontal and vertical wet surfaces such as pool, water tank, sauna, Turkish bath ceramics on surfaces such as concrete, plaster and screed in environments,It is used for bonding coatings such as glass mosaics.

Advantages:

• It is decorative due to its white color.

• Easier joint because it is the same color as the white joint can be applied.

• It is resistant to water and frost.

• It is flexible and provides strong adhesion.

• It is not affected by temperature changes.

• Provides high stability, does not sag in vertical applications.

Preparation of the Surface: Special attention must be given that the application surface is cured. The application surface must be clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents and detergents. The application surface must be wet and kept damp. lf the water absorption of the surface is high, the product must be applied after the primer.
Preparation of the Morlar: 25 kg of Falcon Granite Ceramic Adhesive Mortar - White is added to approximately 6 - 7 liters of clean water and mixed by a mixer with low speed or with a trowel until there are no lumps. Prepared mortar should be left to mature for 5 - 1O minutes, mixed again before use. The mortar must be used within 2 - 2.5 hours.
Application lnformation: A contact layer is generated by pressing the adhesive mortar strongly onto the application surface, the layer is combed with an appropriate notched trowel. The adhesive mortar must contact at least 80% of the backside of the ceramic. Depending on the plates used and the flatness of the surface, adhesive mortar can be applied both on the backside of the ceramic and on the surface, for a double sided bonding. Combing directions must be perpendicular to each other. For betler bonding, apply force with a rubber hammer.
Consumption: 4 - 6 kg/m2
Caution: Avoid application in temperatures below +5°C and over +35°C. Pay attention to the amount of water added to the mortar. Do not add more water than necessary. Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind. Never attempt to extend the expired mortar by adding powder and water. The values mentioned above are obtained at 23±2°C and 50±5 relative humidity conditions.
Packaging: 25 kg craft bags
Shelf Life: Unopened packages can be stored in dry environments for up to 12 months, stacked maximum 1O packages on a pallet.
Health and Safety: As with all chemical products, contact with food, skin, eyes and mouth should be avoided during usage and storing. lf swallowed by accident, consult a doctor. in case of contact with skin, rinse with plenty of water. Keep out of reach of children.

DIMENSIONS
Dimensions of 1 Bag: 52x25x10cm
Weight of 1 Bag: 25 Kg ±2% 
Dimensions of 1 Pallet: 105x105x120cm
Product Quantity in 1 Pallet: 64 Pieces
Weight of 1 Pallet: 1600 Kg ±2%